Charge Led - Datamax MICROFLASH 4TE User Manual

MICROFLASH 4TE PRINTER USER'S GUIDE

Charge LED

Charge LED
Red (solid):
The battery
has less than
5% power.
Orange (solid):
The battery
has less than
25% power.
Green (solid):
The battery is
near, or at, full
capacity.
Red to orange
flash - fast
Orange flash -
slow
Orange flash -
fast
Description
• If A/C power is not plugged
in, the printer will soon turn
off.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• If A/C power is not plugged
in, indicates the battery
charge is low.
• If A/C power is plugged in,
the LED flashes and
charging is in progress.
• If A/C power is not plugged
in, the battery is well
charged.
• If A/C power is plugged in,
the LED is solid and
charging is complete.
Battery voltage is too high.
Charge has timed out.
Internal code error.
12
Action
• Charge the
battery.
• None. Wait
for the
charge LED
to turn green.
• Charge the
battery.
• None. Wait
for the
charge LED
to turn green.
None.
None.
Replace
battery.
Restart battery
charge (battery
may be bad).
Remove the
battery, then
re-connect A/C
power.