How To Use Site Survey - Linksys RE6300 User Manual

How to use Site Survey

Site Survey gives a snapshot of all neighboring access points and wireless routers
within range of the extender.
To open the Site Survey page:
1. Log in to the browser-
on page 5).
2. Click the Wireless tab. Click the Site Survey page.
3. Select To connect to a wireless network, click the button next to the wireless
network name (SSID) in the Select column, and click Connect.
4. SSID Displays the name of neighboring wireless networks.
5. GHz Displays the radio band (in GHz) of the neighboring wireless networks
6. Signal Strength Displays the relative position of the neighboring access points
by indicating the power of the wireless signal received:
wave = 50%, dot + two waves = 75%, dot + three waves = 100%. If no waves are
displayed, your extender is too far from the upstream access point or the signal is
blocked. Try to keep the signal strength between 60% and 100% for optimum
performance.
7. Security Displays the mode of security in use by the neighboring APs. If a network
supports Wi-Fi Protected Setup, the Wi-Fi Protected Setup icon is also displayed.
-
dot only = 25%, dot + one