Site Survey; Qos (Quality Of Service) - Linksys RE7000 User Manual

Site Survey

Site Survey gives a snapshot of all access points and wireless routers within range of the
extender.
Log in to the settings interface (see "How to Access the Settings Interface" on page 17).
Wireless
Click the tab. Click the
Select—Click the button next to the wireless network name (SSID) in the
•
column, and click Connect. For dual-band networks, be sure to connect to both
bands, 2.4 GHz and 5 GHz.
SSID—The names of neighboring wireless networks.
•
• GHz—The radio band (in GHz) of the neighboring wireless networks
• Signal Strength—The power of the wireless signal received: dot only = 25%, dot
+ one wave = 50%, dot + two waves = 75%, dot + three waves = 100%. If no
waves are displayed, your extender is too far from the upstream access point or
the signal is blocked. Try to keep the signal strength between 50% and 100%
for optimum performance.
Security—The mode of security in use by the neighboring wireless networks If a
•
network supports Wi-Fi Protected Setup, the Wi-Fi Protected Setup icon is also
displayed.

QoS (Quality of Service)

RE7000 supports WMM (Wi-Fi Multimedia), which enhances the quality of service (QoS) on a
network. QoS prioritizes data packets according to four traffic classes: voice, video, best effort,
and background. We recommend keeping the default QoS settings.
Site Survey
page.
Select
21