Table of Contents
Advertisement
3 Getting Started
This will automatically load the web configuration in your web browser.
When prompted to log in, enter the default password admin and press ok to continue.
Web-based Management
Please refer to Chapter 4
D-Link Network Assistant (DNA)
D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same Layer
2 network segment as your PC. You can download the DNA App from the Chrome web store and install it in
a Chrome web browser.
1.
Go to the Chrome web store at: https://chrome.google.com/webstore, and search the store for
Network Assistant.
2.
Click 'ADD TO CHROME' button on the right hand side of the search results.
3.
Click 'Add app' button in the pop-up window to install the D-Link Network Assistant in Chrome.
4.
When the installation process has finished:
(Option 1) Click the 'LAUNCH APP' button in the upper-right corner of the window to start DNA.
(Option 2) Click the 'Apps' icon in the upper-left corner of the Chrome browser and click the DNA icon
to start the app.
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE: The Switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 – Logon Dialog Box
Configuration
for detailed instructions.
Figure 3.4 – D-LINK Network Assistant
D-Link Smart Managed Switch User Manual
1
1
1
1
Hide quick links:
Advertisement
Table of Contents
