Makita EB5300TH Instruction Manual page 14

► 1. Fastener
Roll up the end of the strap and hold it with the band.
► 1. Band
2. Pull the stabilizer strap until there are no space left
between your back and the blower housing.
To fasten the strap, pull the end of the strap downwards.
1
► 1. Stabilizer strap
To loosen the strap, pull up the end of the fastener.
1
► 1. Fastener
Hip belt
Optional accessory
The hip belt enables the operator to carry the tool more
stably.
1
CAUTION:
buckle before unloading the blower.
Adjusting the control lever position
For tube throttle model: Move the control handle
along the swivel pipe to the most comfortable position.
Then tighten the control handle with the clamp screw.
► 1. Clamp screw
For hip throttle model: Move the handle assembly
along the swivel pipe to the most comfortable position.
Then tighten the handle with the clamp screw.
14 ENGLISH
Make sure to release the hip belt
1
1