Mazda CX-52017 Owner's Manual page 90

Before Driving
Doors and Locks
Confirm that all doors and the liftgate

are securely locked.
For the liftgate, move it without pressing
the electric liftgate opener to verify that
the liftgate has not been left ajar.
All doors and the liftgate cannot be

locked when any door or the liftgate is
open.
It may require a few seconds for the

doors to unlock after the request switch
is pressed.
A beep sound is heard for confirmation

when the doors and the liftgate are
locked/unlocked using the request
switch. If you prefer, the beep sound can
be turned off.
The volume of the beep sound can also
be changed. Refer to Personalization
Features on page 9-10.
Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer (All of the doors
and the liftgate are locked and
unlocked when the LOCK button on
the key is pressed and held for five
seconds.).
The beep sound activates at the
currently set volume. The setting
changes each time the LOCK button
on the key is pressed and the beep
sound activates at the set volume. (If
the beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed by
doing any one of the following:
3-14
Switching the ignition to ACC or

ON.
Closing the driver's door.

Opening the liftgate.

Not operating the key for 10

seconds.
Pressing any button except the

LOCK button on the key.
Pressing a request switch.
