Mazda CX-52017 Owner's Manual page 258

When Driving
i-ACTIVSENSE
In addition, the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) system display indication is displayed on the multi-information display and the
active driving display at the same time.
NOTE
If the ignition is switched off while the Mazda Radar Cruise Control with Stop & Go

function (MRCC with Stop & Go function) system is operating, the system will be
operable when the ignition is switched ON the next time.
When the MODE switch is pressed a second time while the Mazda Radar Cruise Control

with Stop & Go function (MRCC with Stop & Go function) system is operating, the system
switches to the cruise control function.
Refer to Cruise Control Function on page 4-125.
How to set the speed
1. Adjust the vehicle speed to the desired setting using the accelerator pedal.
2. Headway control begins when the SET or SET switch is pressed.
The set speed and the inter-vehicle distance display filled with white lines is displayed.
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) main indicator (white) switches to the Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go function) set indicator (green) at the same time.
Travel status
During travel at constant speed
During travel under headway con-
trol
4-120
Indication on multi-information
display
Indication on active driving dis-
play