Help - D-Link DCS-5222L User Manual

Section 4 - Configuration
The Help screen provides you with support information about the
DCS-5222L/DCS-5211L for your reference.
1. Why can't I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example),
you are not connecting to a website on the Internet or have to be connected to
the Internet. The device has the utility built-in to a ROM chip in the device itself.
Your computer must be on the same IP subnet to connect to the web-based
utility.
• Make sure you have an updated Java-enabled web browser. We recommend
the following:
• Internet Explorer 6.0 or higher
• Firefox 1.5 or higher
• Netscape 8 or higher
• Mozilla 1.7.12 (5.0) or higher
• Opera 8.5 or higher
• Safari 1.2 or higher (with Java 1.3.1 or higher)
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a
different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not
be on.
• Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice,
Sygate, Norton Personal Firewall, and Windows
help files included with your firewall software for more information on disabling or configuring it.
D-Link DCS-5222L/DCS-5211L User Manual

Help

firewall may block access to the configuration pages. Check the
®
46