Sd Recording - D-Link DCS-5222L User Manual

Section 4 - Configuration

SD Recording

This option allows you to configure recording settings and scheduling. You
can record video to a Samba network drive on your local network.
Enable recording: Check this checkbox to enable the recording feature. After enabling
recording, you will need to select a scheduling method.
SD Card: Select this option if you have inserted an available SD card into the camera.
Trigger byMotion: Trigger byMotion begins SD recording after a motion is detected.
Schedule SD recording in a specified time.
Recording Type: It is possible to set the recording codec, set pre-event recording, and post-
event recording here when Trigger by is activated. You can also select recording as Snapshot
or Video.
Recording Length: Use this to set the time length of each recording video.
Keep Free Space: This sets the capacity of your local SD Card to prevent the system from becoming unstable.
Cyclic: When this option is selected, it will cause the oldest folder to be deleted when the system requires storage space for new files.
D-Link DCS-5222L/DCS-5211L User Manual 36