Section 3 - Installation
Connect one end of the blue Ethernet cables included in your package to the Ethernet port on the back of the DCS-5222L/DCS-
5211L camera. Connect the other end of the cable to an available LAN port on your router or broadband modem.
Connecting to a router
Attach the power adapter to the power jack located on the back of the DCS-5222L/DCS-5211L
and connect the power adapter to a power outlet. After connecting the power adapter, you
should see the status LED on the front of the camera become red.
The status LED will light red when it receives power, will light green after the camera
connects to the network, and will flash green when the camera is being accessed.
D-Link DCS-5222L/DCS-5211L User Manual
Connect the Ethernet Cable
Connect the Power Adapter
19