Setting Motion + Timelapse Options; Setting Infostrip Options; Pir Sensitivity; Setting Multi-Shot - Moultrie S-Series Instructions Manual

F

SETTING MOTION + TIMELAPSE OPTIONS

Setting Motion + Timelapse Features
The camera operates in Motion Detect Mode and Time Lapse Mode during the programmed intervals.
NOTE: The settings entered for both Timelapse and Motion Detect modes will be used when in this mode. Settings can be made in their
respective menus.
G

SETTING INFOSTRIP OPTIONS

Infostrip Active
Choose between:
YES - Camera Name, Time, etc, information will be imprinted at the bottom
of the image/video as an information bar.
Note: Remember to input the camera name in the setup and set the clock accordingly.
NO - No information bar will be imprinted.
Setting Date and Time
IMPORTANT! Use to set date and time.
10
Event Delay Setting
Detection Delay determines the number of minutes between pictures when an
animal is detected and remains in range. Choose between (NONE, 10 sec, 30 sec,
1 min, 5min, 10min, or 30 min).

PIR Sensitivity

PIR Sensitivity allows you to control as to how much movement and at what distance
the camera will trigger. HIGH sensitivity will allow for more distance, but will make
the camera slightly more susceptible to false triggers and is ideal for open areas such as
fields and food plots. LOW sensitivity will shorten the distance but lower the chance of
INFOSTRIP SETTINGS
false triggers and is ideal for close range traps and deeply wooded areas.
INFOSTRIP ACTIVE
X Yes
No

Setting Multi-Shot

Choose how many pictures you would like captured in a sequence
when the camera is triggered (1 or 3).
Available options are:
INFOSTRIP SETTINGS
1 (OFF) - Single photo taken per event.
DATE & TIME
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
12 / 14 / 2014
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo
10 : 23 pm
after the first requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of
empty images if the subject moves out of the field of view after the first shot.
MOTION DETECT MODE
DETECTION DELAY
30 minutes
10 minutes
5 minutes
1 minute
30 seconds
10 seconds
MOTION DETECT MODE
PIR SENSITIVITY
X High
Low
MOTION DETECT MODE
MULTI-SHOT
X 1 (off)
3 Triggered
3 Burst
7