Table of Contents
Advertisement
XT65/XT75 Hardware Interface Overview
8.2 Compliance with FCC Rules and Regulations
8.2
Compliance with FCC Rules and Regulations
The Equipment Authorization Certification for the Siemens reference application described in
registered under the following identifiers:
FCC Identifier: QIPXT65
Industry Canada Certification Number: 267W-XT65
Granted to Siemens AG
FCC Identifier QIPXT75
Industry Canada Certification Number: 267W-XT75
Granted to Siemens AG
Manufacturers of mobile or fixed devices incorporating XT65/XT75 modules are authorized to use the FCC
Grants and Industry Canada Certificates of the XT65/XT75 modules for their own final products according to the
conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the
outside, or the host device shall bear a second label stating "Contains FCC ID QIP XT65" resp. "Contains FCC
ID QIP XT75".
IMPORTANT:
Manufacturers of portable applications incorporating XT65/XT75 modules are required to have their final product
certified and apply for their own FCC Grant and Industry Canada Certificate related to the specific portable
mobile. This is mandatory to meet the SAR requirements for portable mobiles (see
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
If the final product is not approved for use in U.S. territories the application manufacturer shall take care that the
850 MHz and 1900 MHz frequency bands be deactivated and that band settings be inaccessible to end users. If
these demands are not met (e.g. if the AT interface is accessible to end users), it is the responsibility of the appli-
cation manufacturer to always ensure that the application be FCC approved regardless of the country it is mar-
keted in. The frequency bands can be set using the command
AT^SCFG="Radio/Band"[,<rbp>][, <rba>].
A detailed command description can be found in [1].
XT65_XT75_HO_v00.130
Confidential / Preliminary
Page 52 of 67
s
Section 8.1
will be
Section 1.3.2
for detail).
2006-10-12
Advertisement
Table of Contents
