Pppoe/Pppoa - D-Link DSL-2740M User Manual

Section 3 - Configuration
If you selected PPPoE/PPPoA, configure the following information:
STEP 2: SELECT INTERNET CONNECTION TYPE
Username: Enter your ISP account username.
Password: Enter your ISP account password.
VPI: Virtual path identifier (VPI) is the virtual path between two
points in an Asynchronous Transfer Network (ATM) network. Its
valid value is between 0 and 255. Enter the correct VPI provided
by your ISP.
VCI: Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 32 and
65535. Enter the correct VCI provided by your ISP.
Select the type of encapsulation your ISP uses, PPPoE LLC,
Connection Type:
PPPoE VC-Mux, PPPoA LLC, or PPPoA VC-Mux.
Click Next to continue and proceed to step 3.
D-Link DSL-2740M User Manual

PPPoE/PPPoA

16