Lan Qos Settings - D-Link DSL-2740M User Manual

Section 3 - Configuration
This page allows you to configure the LAN QoS Settings.
LAN QOS RULES CONFIGURATION
Name: Enter a name for this QoS rule.
Select the priority to apply to the rule: Low, Medium, High.
Priority:
Select the protocol to apply the rule to: ICMP, TCP, UDP.
Protocol:
Source IP Range:
Enter the source IP address range and subnet mask.
Source Port Range.
Enter the source port range.
Destination IP
Enter the destination IP address and subnet mask.
Range:
Destination Port
Enter the destination port range.
Range:
Click the Add/Apply button when you are finished.
The currently defined LAN QOS rules are displayed here.
D-Link DSL-2740M User Manual

LAN QoS Settings

ACTIVE LAN QOS RULES
QoS Setup LAN QOS
ADVANCED
50