Cisco CSR 1000v Series Software Configuration Manual page 92

Deploying the Cisco CSR 1000v OVA to the VM using vSphere
Property
Resource Template
Features
Enable SCP Server
Enable SSH Login
Enable SSH Login and Disable Telnet Login
Additional Configuration Properties
Enable Password
Domain Name
License Boot Level
able 23: OVA Bootstrap Properties for Cisco IOS XE Release 3.9S and 3.10S
Property
Bootstrap Properties
Login Username
Login Password
Management IPv4 Address/Mask
Management IPv4 Default Gateway
Router name
Features
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
80
Installing the Cisco CSR 1000v in VMware ESXi Environments
Description
(Cisco IOS XE 3.16S2 and later, and Denali 16.2 and later)
Configures the Resource Template.
Possible values: default, service_plane_medium, service_plane_heavy
Enables the IOS SCP feature.
(Enable SSH Login, Cisco IOS XE Release 3.11S)
(Enable SSH Login and Disable Telnet Login, Cisco IOS XE Release
3.12S and later, and Denali 16.2 and later)
Enables remote login using SSH and disables remote login via Telnet.
Requires that the login username and password are set.
Configures the password for privileged (enable) access.
Configures the network domain name.
(Cisco IOS XE 3.13S and later, and Denali 16.2 and later)
Configures the license technology level that is available when the Cisco
CSR 1000v boots.
Description
Sets the login username for the router.
Sets the login password for the router.
Sets the management gateway address/mask in IPv4 format for the
GigabitEthernet0 management interface.
Sets the default management gateway IP address in IPv4 format for
the GigabitEthernet0 management interface.
Configures the hostname of the router.