Creating The Vm - Cisco CSR 1000v Series Software Configuration Manual

Creating the VM

SUMMARY STEPS
1. On the Server Manager, select Dashboard to configure the local server.
2. Select Manager from the top right, and then select Add Roles and Features from the drop-down menu.
3. Click Next.
4. Select Server Roles. In the Roles list, select the following options by clicking on the checkbox:
5. Select Features. In the Features list, select the following option by clicking on the checkbox:
6. Click Next.
DETAILED STEPS
Step 1 On the Server Manager, select Dashboard to configure the local server.
Step 2 Select Manager from the top right, and then select Add Roles and Features from the drop-down menu.
The Add Roles and Features Wizard opens.
Step 3 Click Next.
Step 4 Select Server Roles. In the Roles list, select the following options by clicking on the checkbox:
• File and Storage Services
• Hyper-V
Step 5 Select Features. In the Features list, select the following option by clicking on the checkbox:
• Failover Clustering
Failover clustering is required. It is not automatically installed, so you must make sure this option is checked. This feature
requires that Failover Cluster Manager is installed.
Step 6 Click Next.
Creating the VM
To create the VM, perform the following steps:
SUMMARY STEPS
1. In Hyper-V Manager, click on the host.
2. Select New > Virtual Machine.
3. Click Specify Name and Location.
4. On the Assign Memory screen, enter the Startup Memory value.
5. On the Configure Networking screen, select a network connection to the virtual switch that was previously
created.
6. On the Connect Virtual Hard Disk Screen, select the following option:
7. Review the VM settings, and if correct, click Finish.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
138
Installing the Cisco CSR 1000v in Microsoft Hyper-V Environments