Samsung CLP-610 series User Manual page 47

Hide thumbs Also See for CLP-610 series:
Table of Contents

Advertisement

2
Carefully remove the paper by pulling in the direction as shown
below. Go to step 7.
If you cannot find the jammed paper, or if there is any resistance
removing the paper, stop pulling, and go to step 3.
Caution
• Do not touch the green surface, the OPC drum or the front of
each print cartridge, with your hands or any other material.
Use the handle on each cartridge in order to avoid touching
this area.
• Be careful not to scratch the surface of the paper transfer
belt.
• If you leave the front cover open for more than a few minutes,
the OPC drum can be exposed to light. This will cause
damage to the OPC drum. Close the front cover should the
installation need to be halted for any reason.
3
Close the front cover.
4
Pull the tray open.
5
Remove the jammed paper by gently pulling it straight out as shown
below.
7.2
<Troubleshooting>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp-660 series

Table of Contents