Activating/Deactivating Call Screening; Setting The Recording Parameters - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / answering_m.fm / 28.07.2009
Operating the Gigaset S795 base answering machine
An external call is
Ô
The answering machine
ately in
Answer & Record
the call. The set time for ring delay
¢
( page 40) is ignored.
Activating/deactivating two-way
record
You can record an external call with the
answering
¤
Inform the caller that the call is being
recorded.
§Options§
Two-way Record
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine
§End§
The maximum recording time depends on
the memory available on the
machine. If the memory is full, you will
hear an end tone, the recording is
aborted, and the call recorded up to that
point is listed in the
list as a new message.
•
Activating/deactivating call
screening
While a message is recording, you can
screen calls via the base loudspeaker and
registered handsets.
Permanently activating/deactivating call
screening
¢
v Ì
¢
Handset
§Change§
Call screening can be simultaneously acti-
vated on the base and handset.
40
signaled on the handset:
Select display key.
starts immedi-
mode and records
machine.
Open menu.
Select and press .
§OK§
list as a new message.
Press the display key to stop
two-way record.
answering
answering machine
¢
Call Screening
/ (³= on)
Base
Select display key to activate/
deactivate the function.
Deactivating call screening for the current
recording
You can deactivate the function for your
own handset during the recording.
Press the display key.
§Silence§
•
Setting the recording
parameters
The answering machine
preset at the factory. Individual settings
can be adjusted using the handset.
¢ ¢
Ì
v
Recordings
¤
You can enter data in the following
fields:
Length:
Select maximum recording time
or Maximum.
2 min., 3 min.
Quality:
Select or
Long Play High
ity. If the quality is higher, the maxi-
mum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
Immediately, after 10
or Auto.
Press the display key.
§Save§
Information about ring delay
In Auto mode, the following applies for
ring delay:
u
If there are no new messages, the
answering machine
18 seconds.
u
If there are new messages, the
ing machine answers a call after 10 sec-
onds.
When operating remotely (
you can tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call
charges if you hang up now.
has already been
1 min.,
recording qual-
sec., 18 sec., 30 sec.
answers a call after
answer-
¢
page 41),