Table of Contents
Advertisement
3. Press
Menu and then touch Add 2-sec pause.
This feature adds an automatic two-second pause.
4. Use the keypad to enter the additional numbers that
will be dialed automatically after the second pause.
Tip: You can create pauses longer than two seconds by
entering multiple 2 second pauses.
5. Touch
.
Wait Dialing
Inserting a Wait into your dialing sequence means that the
phone waits until it hears a dial tone before proceeding with
the next sequence of numbers.
Wait sends the next set of numbers only after touching Yes.
This is indicated in the number string as a semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this
will continue to prompt you after each sequence.
1. From the Home screen, touch
touch the Keypad tab.
2. Use the keypad to enter the phone number.
Phone and then
3. Press
Menu and then touch Add wait. This
feature causes the phone to require your acceptance
before sending the next set of entered digits.
4. Touch
.
5. Once prompted to Send the following tones?, touch
Yes to dial the remaining digits.
Multi-Party Calling
Use multi-party call features to set up a call between multiple
callers, such as for a conference call.
1. Establish the first call, by answering an incoming call
or making a call.
2. Touch Add call. The first call is placed on hold.
3. Make the second call by touching the phone number
digits, then press
4. Touch Merge to merge the calls into one conference
call.
5. To end the call touch
.
.
Calling
69
Advertisement
Table of Contents
