Samsung SCH-R970 User Manual page 134

Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
After pairing, your phone and the target device will connect
with each other and exchange information without a
passcode or PIN.
Note: When connected, the
displays in the Status Bar. If you receive a new request
for connection while connected with a Bluetooth
headset, a new Bluetooth icon displays at the left of the
Status bar and Notifications displays the connection
request.
1. Activate the target device's discoverable mode.
2. From the Bluetooth settings page, touch the Visibility
field (shown by the device name).
The device must be visible to pair with an external
device.
3. Touch Scan. Your device displays a list of discovered
in-range Bluetooth devices.
4. Touch a device from the list to initiate pairing.
128
Bluetooth connected icon
5. Enter the passkey or PIN code, if needed, and touch
OK.
6. The external device must accept the connection and
enter your device's PIN code.
Tip: Some devices use a default passcode of 0000. Refer to
the target device's user manual for more information.
• When prompted to connect with the target device,
touch OK to complete the connection, touch Cancel to
retain the pairing only.
Connecting with a Bluetooth Device
1. From the Home screen, touch
Bluetooth. The Bluetooth screen displays.
Connections Connections
2. Under Available devices, touch a previously paired
device. The device connects with your phone.
Menu Settings