Table of Contents
Advertisement
9. Image Capture button: Touch to capture an image
from the video while recording. (Not available with
Video stabilization set to on.)
10. Gallery: Shows a thumbnail image of the last picture
or video you have taken or recorded. Touch to access
the thumbnail image or the Gallery (see "Gallery" on
page 101).
Recording Videos
1. From the Home screen or the Apps screen, touch
Camera
to activate the camera mode.
Note: The camera may not be able to properly record videos
to a memory card with a slow transfer speed.
2. Using the camera's main display screen as a
viewfinder, adjust the image by aiming the camcorder
at the subject.
3. Before you take a video, use the Volume control
buttons to zoom in or out. You can magnify the video up
to x4 (400 percent).
Note: Use either the Up and Down volume keys or spread/
pinch the screen to zoom in or out.
4. Touch the Video key (
red light will blink while recording.
5. Touch anywhere on the screen to re-focus the camera
on that object. The camcorder auto-focuses on the
new target area.
6. To capture an image from the video while recording,
touch
. This feature is not available while the
anti-shake feature is activated.
7. Touch the Stop key (
save the video file to your Camera folder.
– or –
Touch the Pause key (
8. Once the file has been saved, touch the image viewer,
then touch
(Play) to playback your video for review.
9. Press
to return to the viewer.
Reviewing Video
After recording a video, touch Gallery to view the it.
For more information, refer to "Gallery" on page 101.
) to begin shooting video. The
) to stop the recording and
) to pause the recording.
Applications and Widgets
95
Advertisement
Table of Contents
