Table of Contents
Advertisement
3. Use the keypad to enter the additional numbers that will be
dialed automatically after the second pause.
Tip: You can create pauses longer than two seconds by entering
multiple 2-sec pauses.
4. Tap
Wait Dialing
Inserting a Wait into your dialing sequence means that the phone
waits until it hears a dial tone before proceeding with the next
sequence of numbers.
•
Wait sends the next set of numbers only after tapping
indicated in the number string as a semicolon (;).
Note: Do not add multiple Waits (;) to a number string as this will
continue to prompt you after each sequence.
Internal Use Only
1. From the Home screen, tap
on-screen keypad to enter the phone number.
2. Press
phone to require your acceptance before sending the next set
of entered digits.
3. Tap
4. Once prompted to Send the following tones?, tap
the remaining digits.
.
DRAFT
and then tap Add wait. This feature causes the
.
Call Functions and Contacts List
and use the
. This is
to dial
61
Advertisement
Table of Contents
