TP-Link TL-WR841N User Manual page 29

Chapter 4
PPTP
If your ISP provides PPTP connection, please select PPTP.
• Username/Password
fields are case-sensitive.
• Addressing Type - Choose the addressing type given by your ISP, either Dynamic IP
or Static IP. Click the
button to disconnect immediately.
• Server IP Address/Name
ISP.
• MTU(Bytes) - The default MTU size is 1420 bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
• Connection Mode
• Always on - In this mode, the internet connection will be active all the time.
• Connect on demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on demand mode. The internet connection can be disconnected automatically
- Enter the username and password provided by your ISP. These
Connect button to connect immediately. Click the
- Enter server IP address or domain name provided by your
- In this mode, the internet connection can be terminated
- You can click Connect/Disconnect
Configure the Router in Wireless Router Mode
to connect/disconnect
Max Idle Time function as
Disconnect
Max Idle Time
Connect
23