Faq - TP-Link TL-WR841N User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered, please connect your computer to the router using an Ethernet cable and
follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless >
Q2. What should I do if I forget my login password of the Web-based
Utility?
The default username and password of the Web-based Utility are
If you have altered the username and password:
1. Reset the router to factory default settings: press and hold the Reset button for about
7 seconds and then release;
2. Visit http://tplinkwifi.net, and enter
password to log in.
Note: You'll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3. What should I do if I cannot log in to the router's Web-based Utility?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer has connected to the router correctly and the corresponding
LED lights up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure you enter the correct IP address to log in:
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
Wireless Security to retrieve or reset your wireless password.
Obtain DNS server address
> Control Panel >
on the bottom left.
admin (in lowercase) as both username and
automatically.
http://tplinkwifi.net
Network and Internet, and click
admin (in lowercase).
Obtain an IP address
or 192.168.0.1.
View network
165