Grounding considerations
This product is designed to be mounted to a well-grounded mounting surface such as a metal panel.
Additional grounding connections from the S500 mounting tabs or DIN rail (if used), are not required
unless the mounting surface cannot be grounded. Refer to appropriate Chapter of the S500-FBP User's
Manual, for additional information.
ATTENTION
S500 system dimensions
67.5 (2.66)
TU505/506
Figure: Dimensions of the Terminal Unit (front view)
____________________________________________________________________________________________________________
G1
Introduction to AC500
This product is grounded through the DIN rail to chassis ground. Use zinc
plated yellow-chromate stell DIN rail to assure proper grounding. The use of
other DIN rail materials (e.g. aluminium, plastic, etc.) that can corrode, oxidize,
or are poor conductors, can result in improper or intermittent grounding.
57.7
(2.27)
DC505
67.5 (2.66)
TU515/516/531/532
Dimensions:
135 mm
(5.31) inches
1-70
AC500 / Issued: 07.2006