Configuring The Decentralized S500-Fbp I/O Station Using The Sycon.net Fieldbus Configurator - ABB AC500 Introduction Manual

Configuring the decentralized S500-FBP I/O station using the SYCON.net fieldbus
configurator
Now we are going to configure the decentralized S500-FBP I/O station. Proceed as follows:
• In the left-hand window, click on the
entry SYCON.net .
• The SYCON.net fieldbus configurator is opened. Using this configurator, you can configure the
decentralized I/O station.
In the "Fieldbus" tab, open the folder 'PROFIBUS DPV 0' by clicking on the
file "Master". With the left mouse button, click on CM572-DPM. Keep the left mouse button pressed and
drag the object into the left window to append it to the green line (this line represents the connection to
the CPU). Release the left mouse button.
____________________________________________________________________________________________________________
G1
Introduction to AC500
symbol in front of the Tools entry . Then double click the
1-104
symbol. Do the same with
AC500 / Issued: 07.2006