Alarm (Network) - EverFocus EDVR16D1 Instruction Manual

9. DATA PORT
The default data transmitting port number is 37260. User can change it to different port
number for data transfer between DVR and client PC.
Note: If you wish to have multiple users log into the DVR, please open a range of ports
on your router. For example if you want to allow 4 clients to login through the default
port 37260, you should open the port range 37260-37263 on your router.
10. BW CONTROL
This configuration allows user to control the bandwidth of DVR.
11. MAC ADDR
This field is for those Internet service providers or Network administrators who require a
MAC address of the network card of the DVR. This option cannot be changed.

3.7.2 ALARM (NETWORK)

Note: Since every Network Configuration is different, please contact your Network
Administrator or ISP for how to assign those IP addresses and port numbers.
DVR can send out Alarm message to an Alarm Server (PowerCon4). In the ALARM of the
NETWORK SETUP MENU, we define:
Diagram 3.11
38 38 38 38