10Base-T Hub; 100Base-Tx Hub; Hub Without Uplink (Mdi-Ii) Port - D-Link DES-1016 User Manual

10/100 Fast Ethernet Switch User's Guide

10BASE-T Hub

For a 10 BASE-T hub, the Switch's LED indicators should illuminate the
following:
♦ 100M LED speed indicator is OFF .
♦ Link/Act indicator is ON.
♦ FDX indicator is OFF.

100BASE-TX Hub

For a 100Base-TX hub, the Switch's LED indicators should illuminate the
following:
♦ 100M LED speed indicator is ON .
♦ Link/Act is ON.
♦ FDX LED indicator is OFF.

Hub without Uplink (MDI-II) port

If a hub is not equipped with an Uplink (MDI-II) port, then a connection
can be made using either straight cable or crossover cable (see Appendix B ,
Pin Specification for cable requirement).
19
Connecting The Switch