Raymarine ray50 Mounting And Getting Started page 5

Disclaimer
Raymarine does not warrant that this product is
error-free or that it is compatible with products
manufactured by any person or entity other than
Raymarine.
Raymarine is not responsible for damages or injuries
caused by your use or inability to use the product, by the
interaction of the product with products manufactured
by others, or by errors in information utilized by the
product supplied by third parties.
FCC
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
FCC Interference Statement (Part 15.105
(b))
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio / TV
technician for help.
Industry Canada
This device complies with Industry Canada
License-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference; and
2. This device must accept any interference, including
interference that may cause undesired operation
of the device.
This Class B digital apparatus complies with Canadian
ICES-003.
Industrie Canada (Français)
Cet appareil est conforme aux normes d'exemption de
licence RSS d'Industry Canada.
Son fonctionnement est soumis aux deux conditions
suivantes:
1. cet appareil ne doit pas causer d'interférence, et
2. cet appareil doit accepter toute interférence,
notamment les interférences qui peuvent affecter
son fonctionnement.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
Licensing
Prior to using this product please check your national
requirements for both operators and equipment
licensing.
Station Licence
FCC station license requirement
An FCC Ship Radio Station License and Call Sign are
not required for most recreational vessels travelling in
US waters. However, you must obtain a license if your
vessel travels to foreign ports.
Ships that use MF/HF single side-band radio, satellite
communications, or telegraphy must be licensed by the
FCC. You can obtain a Station License by filing FCC
Form 605, which is available from the FCC website
listed above.
Industry Canada
Industry Canada license requirement
You do not need a license to operate this product within
sovereign waters of Canada or the US. You will need a
license to operate this radio outside of Canada or the
US. To obtain Industry Canada licensing information,
contact the nearest field or regional office, or write:
Industry Canada Radio Regulatory Branch
Attention: DOSP
300 Slater Street
Ottawa, Ontario
Canada, KIA OC8
European licensing requirements
Regulations in some areas require that an Operator's
license is obtained before operating a VHF radio. It is
your responsibility to determine whether a license is
required in your area before operating this equipment.
Additional information – Ray50 / Ray52
The following additional information is required for
completing a license application in Canada and the US.
Industry Canada 4069B-RAY50D
certification number
FCC ID PJ5–RAY50
FCC Type accepted Parts 2, 15 and 80
Output power 1 watt (low) and 25 watt (high)
Modulation FM
Frequency range 155.500 MHz to 163.275 MHz
5