Safety And General Information - RCA BRM300DV Instruction Manual

6

SAFETY AND GENERAL INFORMATION

This radio is restricted to occupational use only
to satisfy FCC RF energy exposure requirements.
Before using this product, read the operating
instructions.
• Do not transmit using high output power
for extended periods as the transceiver may
overheat.
• Turn radio off prior to entering any area with a
potentially explosive atmosphere, such as gas,
petroleum, chemicals, blasting caps, etc.
• Do not attempt to configure your transceiver
while driving. Be aware of local laws regarding
the use of headsets while driving.
• This equipment is to be serviced only by
authorized RCA Communications Systems
technicians. Any service performed by
unauthorized technicians will void the warranty.
• Turn radio off when near electrical blasting
caps to avoid possible interference with blasting
operations. Obey posted signs such as those in
BRM300D Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
hospitals or blasting areas advising people to
turn off all two-way radios.
• Do not place radio equipment over an air bag or
in an air bag's deployment area, as an inflated
air bag could propel the equipment and cause
serious injury.
• Do not place the radio close to a heat source
or expose the radio to direct sunlight for a
prolonged time.
• Do not place the transceiver in an excessively
dusty, humid or wet area, or on an unstable
surface.
• If smoke or an abnormal odor is detected
coming from the transceiver, turn OFF the
transceiver immediately and contact your RCA
dealer.
For a complete list of RCA approved antennas and
audio accessories, visit:
www.RCACommunicationsSystems.com