Making A Radio Call; Making A Call With Channel Selector Buttons - RCA BRM300DV Instruction Manual

24
on the channel.
1. Press the pre-programmed Monitor button and
listen for activity. The monitor icon appears on
the display.
2. If you hear activity on the channel the channel is
busy. If you hear "white noise" on the channel
the channel is free.

Making a Radio Call

You can select a channel, subscriber ID, or group
by using:
• The programmable buttons
• The contacts list
• Manual Dial (using contacts list) - This method
is for Private Calls only and is dialed using the
keypad.
Note: Your radio must have the Privacy feature
enabled on the channel to send a privacy-enabled
transmission. Only target radios with the same
Privacy Key OR the same Key Value and Key
ID as your radio will be able to unscramble the
transmission.
BRM300D Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
Making A Call With Channel Selector
Buttons
Making a Group Call
To make a Group Call, your radio must be
configured to be part of the group.
1. Push the Channel Selector Buttons to select the
channel with the active group alias or ID.
2. Press the [PTT] button to make the call. When
the target radio responds, the LED lights up
green.
3. The display shows the Group icon, group alias
or ID, and transmitting radio alias or ID. Note:
If Talk Permit Function is enabled, wait for the
Talk Permit Tone to finish, then speak clearly
into the microphone.
4. Release the [PTT] button to listen.
5. If there is no voice activity for a predetermined
period of time, the call ends. The radio returns
to the screen you were on prior to initiating
the call.