Remote Monitor; Initiating Remote Monitor; Contacts Settings - RCA BRM300DV Instruction Manual

BRM300D

Remote Monitor

Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or
IDs only). No audible or visual indication is given
to the target radio. You can use this feature
to monitor, remotely, any audible activity
surrounding the target radio.
Note: Your radio must be programmed by your
RCA Communications Systems dealer to allow
you to use the Remote Monitor feature.

Initiating Remote Monitor

Use the programmed Remote Monitor button.
1. Press [VK] to access the main menu.
2. Press [▲] or [▼] to navigate to Contacts and
press [VK] to select.
3. Press [▲] or [▼] button to get the required
subscriber alias or ID and press [VK] button to
select. OR - press [▲] or [▼] button to Manual
Dial, then press [VK]. Input subscriber alias or ID
and then press [VK].
Professional Digital Two-Way Mobile Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
4. Press [▲] or [▼] to Remote Monitor and press
[VK] button. Wait for acknowledgement.
5. The screen will display Remote Monitor:
<Subscriber alias or ID>, indicating that Remote
Monitor is in progress. The LED blinks red.
6. The display shows Remote Monitor Successful
OR - Shows Remote Monitor Failed.
7. If successful, the radio will start receiving audio
from the monitored radio for a programmed
duration. Once the timer expires, the radio
sounds an alert tone and the display shows
Remote Monitor Ended. OR - If unsuccessful,
the radio repeats the attempt until the
programmed number of tries expires.

Contacts Settings

Contacts provide "address-book" capabilities on
your radio. Each entry corresponds to an alias or
ID that you can use to initiate a call. Additionally
each entry, depending on context, associates with
one of five types of calls: Group Call, Private Call,
29