2-2. OPENING OF SS-32 AND VP-18 BOARD
1)
Stand the unit on its right side.
2)
Remove the four (PTPWH 3x8) screws and turn the SS-32
board and the VP-18 board in the direction shown by the
arrow.
screw (PTPWH 3x8)
2-3. REMOVAL OF LOADING MOTOR
1)
Take off the driving belt.
2)
Remove the two special head screws (STEP) to take off the
loading motor.
3)
Disconnect the CN5 connector on the SS-32 board.
0
2-2
screw (PTPWH 3x8)
\
SS-32, VP-18 board
connector (C;N5)
SS-32 board