Search And Repeat Operations - Sony LDP-1500P Service Manual

1-9. SEARCH AND REPEAT OPERATIONS
Search and repeat operations are activated by the respective commands
from an external computer or by operating the RM-2001 remote control
unit. For detailed instructions, refer to the LDM-1500 interface manual
or to the RM-2001 operating instruction manual.
The use of these operations differ according to whether a videodisc is
CAV or CLV.
With CAV discs, enter the frame number. If the chapter number is pre-
recorded, the number can be used to perform a search and a repeat opera-
tion of the desired chapter on a disc. In the search operation, when a
designated frame or the beginning of the chapter number is located, the
player is automatically set to display the still picture. In the repeat opera-
tion, the desired playback mode can be obtained.
With CLV discs, enter the time number. If chapter numbers are pre-
recorded, these numbers can also be used. When the beginning of a
designated time number (chapter) is located, the player is set to the nor-
mal playback mode.
Note
If you assign an invalid number to be searched, the search operation may
continue about 10 seconds. The player will then enter the still mode with
a CAV disc or the play mode with a CLV disc.
The still mode (for CAV videodiscs) or the stop mode (for CLV videodiscs)
is entered at the beginning of the program area when the player detects
lead-in, and at the end of the program area when the player detects
lead-out.
1-18