Programmable (Band Limit) Memory Scan (Pms) - Yaesu FT-65R Advance Manual

Scanning

Programmable (Band Limit) Memory Scan (PMS)

This feature allows setting sub-band limits for either scanning or manual VFO operation.
For example, you might wish to set up a limit (in North America) of 144.300 MHz to
148.000 MHz to prevent encroachment into the SSB/CW "Weak Signal" portion of the
band below 144.300 MHz. Here's how to do this:
1. Set the transceiver to the VFO mode by pressing the [ V/M] key, if necessary.
2. Set 144.300 MHz into Memory Channel L01 (the "L" designates the Lower sub-band
limit).
3. Likewise, set 148.000 MHz into Memory Channel U01 (the "U" designates the Upper
sub-band limit).
4. Press and hold the [#BAND] key.
5. Press the [▲] or [▼] key to select the "PMS-1"
PMS-(number) will change depending on the currently-selected PMS
frequency pair.
6. Press the PTT switch to return to normal operation.
For more details on programmed mode (VFO) scan, refer to the FT-
65R/E Operating Manual.
7. Confirm the transceiver is in the VFO mode, press
the [#BAND] key after pressing the F key.
The icon will appear on the LCD display and
the scanning starts just within the programmed
range.
10 pairs of Band Limit memories, labeled L01/U01 through L10/U10
are available. Therefore upper and lower operating limits may be set
for multiple segments on a number of bands, if you like.
FT-65R/FT-65E Advance Manual 19