Weather Alert Scan - Yaesu FT-65R Advance Manual

Scanning

Weather Alert Scan

This feature allows monitoring the Weather
Broadcast Memory Channels for the presence
of the NOAA Alert Tone while operating in VFO
scan, or Memory channel scan.
When the Weather Alert Scan feature is engaged in the VFO mode, or the Memory mode,
the FT-65R/E will check the Weather Broadcast Memory Channels for the NOAA Alert
Tone every five seconds while scanning. the display will be observed periodically shifting
from the scanner to the Weather Broadcast bank, and scanning the Weather channels
quickly in search of the Alert Tone, after which regular scanning will resume for another
five seconds.
To scan only the Weather Broadcast channels, press and hold the [1] key, and then press
the PTT switch (or press and hold the [▲] or [▼] key).
1. Press and hold the F key to enter the Set Mode.
2. Press the [▲] or [▼] key to select Set Mode Item "38 WX ALERT".
3. Press the F key momentarily to enable adjustment of this item.
4. Press the [▲] or [▼] key to select "ALT . ON" or
"ALT . OFF (default setting)".
5. Press the PTT switch to save the new setting and return to normal operation.
• When scanning the Weather Broadcast Channels, the transceiver will
remain muted until the Alert Tone is received. This yields a long period
of monitoring time, as no power will be consumed for audio output while
scanning for the Alert Tone is in progress.
• When the scanner encounters an Alert Tone, the scanning will stop. The
"ALARM" message will appear on the display and the transceiver will
sound a beep.
FT-65R/FT-65E Advance Manual
CH Frequency
01 162.550 MHz
02 162.400 MHz
03 162.475 MHz
04 162.425 MHz
05 162.450 MHz
18
CH Frequency
06 162.500 MHz
07 162.525 MHz
08 161.650 MHz
09 161.775 MHz
10 163.275 MHz