Table of Contents
Advertisement
unit.
5.Remove the power module
① Remove the four screws indicated on the
figure above by
○
② Then remove the power module
6.Remove the Main board
① Remove the six screws indicated on the
figure above by
○
② Disconnected the coupler CN28、CN2、CN26、
CN22、CN23、CN20、CN21
③ Remove the Main board
6.1 whole machine
The whole machine includes Packaging subassembly、Front-frame subassembly、Back-cover
subassembly、 Screen bracket subassembly、 Base subassembly、 LCD panel、 Power assembly （PSU） 、
Wire subassembly.
Remove the speaker
8
.
Remove the eight screws, take out the speaker
Remove the remote control board
9
.
Remove the two screws, take out the remote control
board
25
Advertisement
Table of Contents
