Table of Contents
Advertisement
Quick Links
Warning
Warning
CAUTION
RISK ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
!
Caution:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Important Safety Instructions
1.
Read t
hese instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/ Apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
16.
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus
normal use.
EN-1
Haier LCD HDTV
!
!
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Advertisement
Table of Contents
Related Manuals for Haier HL32XK2
Summary of Contents for Haier HL32XK2
-
Page 1: Warning
The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use. EN-1 Haier LCD HDTV The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of... -
Page 2: Fcc Statement
*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. *Consult the dealer or an experienced radio/TV technician for help. This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may be not cause harmful interference. -
Page 3: Safety Instructions
SAVE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide you in getting the best use of your product. Remember to record the model and serial number. They are on label in back of the unit. -
Page 4: Table Of Contents
CC (Closed Caption Display)... 24 USB Input ...25 To play pictures... 25 To play music ... 26 To play video... 26 Universal Remote Control Setting Up Your Remote Control ...27 Remote Control Codes ...29 Maintenance Specification Troubleshooting Warranty Contents Haier LCD HDTV EN-4... -
Page 5: Introduction
Introduction Introduction Controls This is a simplified representation of the TV front panel, side panel control buttons and side inputs. TV Side panel controls and connections Menu display. Press to access the on-screen 1 MENU menu display. Press to access the input source mode. Press... -
Page 6: Connection Options
Note Output In standby mode, these ports will not work. Antenna Connect cable or antenna signals to the TV, Input either directly or through your cable box. Connect a HDMI device to receive digital audio HDMI In and uncompressed digital video. -
Page 7: Universal Remote Control
Introduction Universal Remote control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV. Function introduction EN-7 Haier LCD HDTV 1 POWER Press to turn on and off the TV. -
Page 8: Installation
Installation External Equipment Connections Accessories Remote control Antenna Connection Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) VHF Antenna... -
Page 9: Choose Your Connection
Component Setup How to connect Connect the DVD video outputs (COMPONENT) to the Y Pb Pr jacks on the TV and connect the DVD audio PLAY on outputs to the YPbPr Audio IN jacks on the TV, as shown in the figure. -
Page 10: Connecting A Dtv (Digital Tv)
Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. -
Page 11: Hdmi And Dvi Input
Turn on the computer and the TV. Use INPUT on the remote control to select VGA or HDMI source. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in VGA mode. If noise... -
Page 12: Connecting Headphones
Select Main source menu. Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Back of TV Plug a set of headphones into the 3.5 mm mini-jack... -
Page 13: Operation
Operation Operation In the manual, the OSD (on screen display) may be different from your TV’s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. -
Page 14: Channel Skip
TV (NTSC and ATSC) channels available in your local area. When Cable is selected, the TV will detect cable company supplied signals and will search for cable TV (NTSC, QAM modulated) channels available in your Area. -
Page 15: Select The Desired Program
Select the desired sound Press VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. -
Page 16: How To Customize Your Own Picture Status
/ ENTER button and then use / ENTER button and then use / ENTER button and then use Effect Video Demo Partition Left Demo Audio Channel Function Lock Select EXIT Back MJC Demo 120HZ FULL MOTION Haier LCD HDTV EN-16... -
Page 17: Pc Set
Function Lock Video ENTER Adjust Press / ENTER button and then use to select PC. EN-17 Haier LCD HDTV Press to adjust the setting. Audio menu How to select audio mode Press select Audio menu. Press to select Mode. button to... -
Page 18: Sap Broadcasts Setup
Press to select OK, then press OK to confirm. The TV screen will be black and no picture , but the sound is still normal. You can press POWER button to reveal the picture on the screen. -
Page 19: Dpms
Low, Middle or High. Screen Mode Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. Note If a fixed image is displayed on the screen for a long time, the image may become permanently burned on the screen and remain visible. -
Page 20: Close Caption
Close Caption This allows you to modify how digital captions are displayed on your TV. Select from the following options to change the visual characteristics of your TV’s digital captioning. Customize the DTV/CADTV captions that appear on your screen. -
Page 21: Lock Menu
A password is required to gain access to this menu. Press MENU button and then use select Lock menu. Then, press The TV is set up with the initial password “0-0-0-0” and security default password is 9-4-4-3. button to button. - Page 22 To select a different Rating, press Select EXIT Back Note The V-chip will automatically block certain categories that are “More restrictive” . For example, if you block “ ” sub-rating in TV-PG, then the “ ” Operation Video Parental Lock Parental Guide Audio MPAA Rating...
-
Page 23: Other Functions
You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Press button to select MPAA Rating item. -
Page 24: Using The Guide
C: Program show time Quick program view Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). -
Page 25: Usb Input
Text 4). CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen;... -
Page 26: To Play Music
Duration Effect Information Operation 1. Play previous picture STOP 2. Play next picture PREV NEXT to select to select button to select folder or file, and 4. Shuffle On or Off 5. Audio Only 6. Information Haier LCD HDTV EN-26... -
Page 27: To Play Video
3. Fast reverse PREV NEXT 4. Repeat 5. Fast forward 6. Play previous video 7. Play next video Do not remove USB device from the TV until you have exited the USB mode otherwise you may damage the USB device. -
Page 28: Setting Up Your Remote Control
Device LED will blink if user presses any key (if the key has data in current mode.). If the key has no data, then LED will not blink. Default init status: TV/Haier codeset. Manually Programming the Control Check the code no. from the code list. -
Page 29: Remote Control Codes
Fast Programming Haier default TV codeset Press and holding the ENTER key and then press POWER key for 3 seconds, the LED will blink 3 times and turn off, default Haier codeset (001) will be programmed to the control. Remote Control Codes NO. - Page 30 060 076 331 349 350 352 185 Pioneer 060 062 156 157 205 212 186 Plasmsync 187 Polaroid 211 217 220 228 315 339 188 Portland 060 061 062 066 076 333 349 352 189 Price Club Haier LCD HDTV EN-30...
- Page 31 265 Vidikron 055 320 266 Vidtech 060 061 062 349 267 Viewsonic 133 214 218 223 233 243 316 356 EN-31 Haier LCD HDTV NO. Brand Code 268 Viking 269 Viore 270 Visco 271 Vizio 133 257 261 296 318 341 356 359 360...
- Page 32 Go Video 012 072 Goldstar 016 030 106 112 120 Gradiente 008 032 Harley Davidson Harman/Kardon Headquarter Hewlett Packard Hitachi 008 013 048 Howard Computers Hughes Network Systems 013 110 122 124 125 130 Humax 110 122 Haier LCD HDTV EN-32...
- Page 33 004 005 006 007 008 033 036 038 039 046 064 065 066 075 111 123 131 135 Stack 013 031 Superscan Sylvania 008 010 020 021 031 032 048 062 088 116 EN-33 Haier LCD HDTV NO. Brand Code Symphonic 008 020 021 032 105 116 Systemax Tagar Systems...
- Page 34 Bel Canto Design Biamp BOSE 071 088 285 Boston Acoustics California Audio Labs Cambridge Sound Works 241 Capetronic Carver 318 322 Cary Audio Design Casio Chase Technologies Clarinette Classe Classic Coby 147 331 Creative 274 302 Haier LCD HDTV EN-34...
-
Page 35: Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen... -
Page 36: Warranty
Check for local interference such as an electrical appliance or power tool. Disconnect the television from power supply and, 10 seconds later, connect the television to the power supply. If the problem still exists, contact authorized after-sales service for technical assistance. Haier LCD HDTV EN-36... - Page 37 Haier be liable, or in any way responsible for incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.
- Page 38 Warranty Haier LCD HDTV EN-38...