Table of Contents
Advertisement
5.2 Back panel controls
Antennal Input
PC VIDEO Input
Connect cable or
Connect the moritor
Antenna signals to
output connector from
The TV,either directly
a PC to the jack
RS-232 INPUT
(CONTROL/SERVICE PORT)
Connect to the RS-232 port on
a PC
5.3 Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in six different modes:
TV, VCR, CABLE, DVD, SETBOX or AUDIO. Pressing the corresponding button on the remote control
allows you to switch between these modes, and control whichever piece of equipment you
choose.
PC/DVI AUDIO Input
connect the audio
from an external
device
HDMI INPUT
For service
connect the monitor
signal to HDMI/DVI
AV Input
Connects the video
and audio signal
frome a video device.
S-Video Input
Connect S-Video out
from an S-VIDEO
device to the S-video
input.
22
AUDIO output
Earphon jack
Connect to
Earphon audio
external
output terminal
Amplifier device.
DVD/DTV Input
(Component)
Connect a component
video device to these jacks.
Advertisement
Table of Contents
