Step 5: Setting The Speakers' Channels; Disc Playback - Philips HTS3115 User Manual

Getting Started
Step 5: Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
A
In 'DISC' mode, press SETUP on the
remote control.
B
Press repeatedly to select { Audio
Setup Page }.
C
Press to highlight { Speakers
Volume }, then press
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
HDMI Audio
Speakers Level Setup
CD Upsampling
Front Left
Lip Sync
Front Right
Center
Subwoofer
Rear Left
Rear Right
D
Use keys to set the volume level for
each speaker (-6dB ~ +6dB) and press
OK to confi rm.
TIPS: The underlined option is the factory default setting.
Press to go back to the previous menu item. Press SETUP to exit the menu.
22
(continued)
E
F
G
.
0dB
0dB
0dB
0dB
0dB
0dB
Use keys to highlight { Speakers
Delay }, then press .
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
HDMI Audio
CD Upsampling
Speakers Distance Setup
Lip Sync
Center
Rear Left
Rear Right
Use keys to set the delay times (0
ms ~ 15 ms) for centre and rear speakers
that best suit your surround sound
needs.
Press OK to confi rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
0ms
0ms
0ms