Step 5: Setting The Speakers' Channels; Getting Started - Philips HTS3100 User Manual

Step 5: Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to
your surroundings and setup.
Before you start...
Stop the disc playback by pressing STOP
button twice or remove the disc from
the disc tray. Otherwise, the settings are
not accessible.
A
In 'DISC' mode, press SETUP on the
remote control.
B
Press
Setup Page }.
C
Press
Volume }, then press
D
Use
each speaker (-6dB ~ +6dB) and press
OK to confi rm.
TIPS: Press
Downloaded From TheatreSystem-Manual.com Manuals
repeatedly to select { Audio
to highlight { Speakers
.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Speakers Level Setup
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
keys to set the volume level for
to go back to the previous menu item. Press SETUP to exit the menu.

Getting Started

E
Use
Delay }, then press
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
F
Use
ms ~ 15 ms) for centre and rear speakers
that best suit your surround sound
needs.
G
Press OK to confi rm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30 cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
0dB
0dB
0dB
0dB
0dB
0dB
(continued)
keys to highlight { Speakers
.
Speakers Distance Setup
Center 0ms
Rear Left
0ms
Rear Right 0ms
keys to set the delay times (0
21