Kenwood Nexedge NX-220 Instruction Manual page 30

■ receiving
A calling ID or text message will appear when a Status call
is received. Press any key to return to normal operation.
■ reviewing Messages in the Stack Memory
1 Press the key programmed as [Stack], or press and hold
the key programmed as [Selcall], [Status], or [Selcall +
Status] to enter Stack mode.
• The last received message is displayed.
2 Press the <B or C> key to select the desired message.
• Message types are identified as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold the S key for  second to cycle the display
information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press the Side 1 key to return to normal operation.
To delete the selected message, press the A key. To
•
confirm the deletion, Press the S key.
• To delete all messages, press and hold the A or # key for 
second. To confirm the deletion, Press the S or
SHOrT/lONG MESSAGES
Received short messages are displayed the same as Status
messages and are stored in the same stack memory (Type I,
II). To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask
your dealer for details.
GPS rEPOrT
To send your location data, you must first connect a GPS unit
to the transceiver. GPS data can be manually transmitted by
pressing the key programmed as [Send the GPS data]. If set up
by your dealer, GPS data may be automatically transmitted at a
preset time interval.
key.