FleetSync: AlPHANUMErIC 2-wAy PAGING FUNCTION
FleetSync is an Alphanumeric -way Paging Function, and is a
protocol owned by Kenwood Corporation.
Note: This function is available only in analog operation.
SElCAll (SElECTIvE CAllING)
A Selcall is a voice call to a station or group of stations.
■ Transmitting <Type I, II>
1 Select your desired zone and channel.
2 Press the key programmed as [Selcall] or [Selcall +
Status] to enter Selcall mode.
3 Press the <B or C> key to select the station you want to
call.
•
On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■ receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when
a Selcall is received <Type I, II>. You can respond to
the call by pressing the PTT switch and speaking into the
microphone.
■ Identification Codes
An ID code is a combination of a -digit Fleet number and a
-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (00 ~ ) to make a group call.
•
Enter an ID number (000 ~ ) to make an individual call in
your fleet.
•
Enter a Fleet number to make a call to all units in the selected
fleet (Fleet call).
•
Enter an ID number to make a call to the selected ID in all
fleets (Supervisor call).