Canon imageRUNNER ADVANCE 6075 Series Service Manual page 319

3
Periodic Service > Periodical Service Operation Item
Periodical Service Operation Item
♦: Replacement (Periodical replacement) ●: Replacement (Consumable parts) Δ: Cleaning ×: Lubrication □: Adjustment ■: Inspection
No. Category Part Name
1 Process Primary Charging Assembly
2 Unit Primary Charging Wire
3 Primary Charging Wire cleaner
4 Primary Charging Wire cleaner holder
5 Grid Wire
6 Pre-transfer Charging Assembly
7 Pre-transfer Charging Wire
8 Pre-transfer Charging Wire cleaner
9 Pre-transfer Charging Wire cleaner holder
10 Developing Cylinder
11 Developing Roller
12 Drum Cleaning Blade
13 Drum Separation Claw
14 Drum Front Side Seal
15 Drum Rear Side Seal
16 Scraper
17 Dustproof Glass
18 Primary Charging Assembly Shield Plate
19 Pre-transfer Charging Assembly Shield
Plate
20 Drum Cleaning Unit Plate
21 Toner collection area
22 Separation Claw Mounting Base
23 Process Unit Rear Guide
24 Drum Sliding Assembly
25 Drum Surface
26 Drum Edge
27 The host machine surface below the
Developing Assembly
28 Developing wheel
29 Lower side of Cylinder.
30 Toner Receptacle Tray
31 Waste Toner Container
3 Periodic Service > Periodical Service Operation Item
Interval
Part No
FM3-7288 1 ● DRBL-1 PRM-UNIT
FB4-3687 2 ♦ PRDC-1 PRM-WIRE With spring:FL3-4558
FL2-04620 2 ♦ PRDC-1 PRM-CLN
FL2-2720 2 ♦
FY1-0883 AR ♦ PRDC-1 PRM-GRID
FM3-7297 1 ● DRBL-1 PO-UNIT
FB4-3687 1 ♦ PRDC-1 PO-WIRE
FL2-0462 1 ♦ PRDC-1 PO-CLN
FL2-2720 1 ♦
FM4-5438 1 ● DRBL-1 DVG-CYL
FB6-6569 2 ● -
FL3-5187 1 ● DRBL-1 CLN-BLD
FB4-8018 3 ● DRBL-1 SP-CLAW
FC8-7086 1 ● DRBL-1 BS-SL-F
FC8-7086 1 ● DRBL-1 BS-SL-R
FC9-9153 2 ● Δ DRBL-1 EXP-SCRP Clean with lint-free paper moistened with alcohol.
- 1 Δ -
- 3 Δ -
- 2 Δ -
- 1 Δ -
- 1 Δ -
- 1 Δ -
- 1 Δ -
- 1 × -
- 1 Δ
- 1 Δ
- 1 Δ -
- 2 Δ -
- 1 Δ -
- 1 Δ -
- 1 Δ -
Counter
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
With spring:FL3-4559
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
-
The blade movement is reversed at every 300 thousand sheets (1-sided).
- Clean with lint-free paper moistened with alcohol.
- Clean with lint-free paper moistened with water.
- Clean with lint-free paper moistened with water.
- Clean with lint-free paper moistened with alcohol.
- Crumb toner clusters.
- Clean with lint-free paper moistened with alcohol.
- Clean with lint-free paper moistened with alcohol.
- Apply lubricant at the Drum Sliding Assembly when abnormal sound is heard at
the time of operation (FY9-6008).
Using lint-free paper, clean the drum with the drum cleaning powder (CK-0429).
Clean with lint-free paper moistened
In a high temperature/humidity environment (30 deg C/80%), it is 250000 sheets
- Remove toner which was scattered at removal of Developing Assembly.
- Clean with lint-free paper moistened with alcohol.
- Clean with lint-free paper moistened with alcohol.
- Remove toner on the tray.
- Clean when the message is displayed.
3-2
Remark
3-2