Replacement Bulbs; Electrical System; High Voltage Devices And Wiring; Electrical System Overload - Chevrolet BOLT EV2017 Owner's Manual

Chevrolet Bolt EV Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
10122739) - 2017 - CRC - 10/3/16
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket (1).
6. Push the replacement bulb
straight into the bulb socket (1)
and turn the bulb socket (1)
clockwise to install it into the
lamp assembly (3).
7. Reinstall the lamp assembly (3)
into the fascia by inserting the
left side first.
8. Push the spring clip into place.

Replacement Bulbs

Exterior Lamp
Back-Up Lamps
License
Plate Lamp
Rear Turn Signal
Lamps
Stoplamp/
Taillamps
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Bulb
High Voltage Devices and
Number
Wiring
921
W5W LL
WY21W
Exposure to high voltage can
cause shock, burns, and even
death. The high voltage
7440
components in the vehicle can
only be serviced by technicians
with special training.
High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering or labels. Do not
probe, tamper with, cut, or modify
high voltage cable or wiring.
Electrical System
Overload
The vehicle has fuses and circuit
breakers to protect against an

electrical system overload.

Vehicle Care 263
{
Warning