Poweredge C6420 Sled; Removing A Sled - Dell PowerEdge C6400 Installation And Service Manual

Figure 14. Inside the C6420 sled
1 sled pull handle
3 SATA connector
5 CPU1 processor heat sink module
7 linking bar
9 memory slot (4)

PowerEdge C6420 sled

The PowerEdge C6420 sled is a server unit that is installed into the PowerEdge C6400 enclosure. The sled features dual processors,
memory, a PCIe expansion slot, mezzanine cards, and onboard storage (SD card and M.2 SATA).

Removing a sled

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
NOTE: The process of removing a sled blank is similar to removing a sled.
Steps
Press the retaining latch and using the handle, slide the sled out of the enclosure.
34 Dell PowerEdge C6400 Installation and Service Manual
Installing and removing enclosure components
Safety instructions.
Before working inside your
2 mezzanine card
4 memory slot (4)
6 CPU2 processor heat sink module socket
8 M.2 SATA riser
10 PCIe expansion card riser assembly
system.