4. Flex the bracket and align pins
3.5-inch internal storage drive. Then install a new 3.5-inch internal storage drive into the bracket. Do not
touch the circuit board
Figure 42. Installing the new 3.5-inch internal storage drive into the bracket
5. Slide the new 3.5-inch internal storage drive into the kit from the rear until the internal storage drive
snaps into position.
Figure 43. Sliding the new 3.5-inch internal storage drive into the kit
1
,
2
,
3
, and
4
5
on the internal storage drive.
on the bracket with the corresponding holes in the new
.
Chapter 7
Hardware installation and replacement
75