Front Bezel; Pcie Card - Lenovo THINKSTATION P320 30BG User Manual

Front bezel

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
To remove and reinstall the front bezel, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 55.
2. Release the three plastic tabs on the left side and pivot the front bezel outward to remove it from the
computer.
Figure 11. Removing the front bezel
3. To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the
corresponding holes in the chassis. Then pivot the front bezel inwards until it snaps into position
on the left side.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 97.

PCIe card

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
Your computer has two PCIe x1 card slots, one PCIe x16 card slot (negotiable link width x4, x1), and one
PCIe x16 graphics card slot (graphics card available on some models).
To install or replace a PCIe card, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 55.
.
Chapter 7 Hardware installation and replacement
57