Samsung AW069CB Owners Instrucitons page 33

I
I
:.
f-Ir
f X Trrna
lI
I y U tr AWI 4gcB/AWl 89c B/Awl sEc B7lAwl BEcBztAW2sEc
Bi 1,,,
r
'r
lnstatlationlcont.)
: .
, :
Now position the cabinet centrally into the window.
Make sure you have about a five downward slant towards
the outside backwards for proper drainage of condensation.
9 Attach the support brackets to the cabinet for adjusting the pitch.
9-1 Select the Type D support bracket position that will place the bracket
near the outermost point on the window sill. ln most cabinets this will
be the first set of holes. Using eight Type B screws, attach lhe
support brackets to each side of the cabinet bottom.
9-2 Thread the Type C bolts into the support brackets, making sure the
cabinet mainlains a slightly downward slant to the outside.
>- Some windows do not have sufficient window ledge on the outside edge of
the window, in such cases the brackels serve no useful pumose.
10 Attach the window sash seal to the window.
10-1 Cut the window sash seal to the window width.
1 0-2 Remove the backing from the window sash seal and attach it to
the underide of the bottom of the window.
10
/Z
T l