Samsung AW069CB Owners Instrucitons page 27

I
I
I
fil r
, - .: .: .
I II lrrna
, .
lll
I I P tr yj_r:c B/AW 1 0 e c B/AW 1 2e c B/AWo I E cB ztAwr oEc B7.1Awr
2 EcBT
In sta lla tion (con t.)
.,
'
':
:' '
5 Carefully remove the chassis from the cabinet by pulling it forward .
(A littie careful leverage with a screwdriver may help to slide the unit out.)
> Now would be an good time to inspect the fan for damage
caused by shipment. Rohte the fan blade with your hands.
. lt should revolve freely without any scratching or unusual noise.
lf such a noise exists, pack the unit up and retum it to your dealer.
The unit may have been misaligned due to shipping abuse.
The empty cabinet without the chassr's ,3 now reratively light.
ff you have common Double Hung Windows, procd
to inshll the
top support channel on.the cabinet
6 Remove the backing from the top support channel seal strip and
attach it to the boftom of the top support channel.
7 Install the top support channel with four or five Type B screws provided.
> Make sure to screw from the top of the cabinet onto the channel.
> The top support channel is "L" shaped. The high side of the channel musl
always face inwards.
8 Attach lhe window filler panels to the cabinet.
8l Slide the window filler panels and their frames into the channels on the
toD and boftom of the cabinet
8-2 Attach the window fller panels to the cabinet using six Type B screws.
seal strip
@